與 DHCP 服務器端的簡單橋接
# Company: PowerCraft Technology
# Author: Copyright Jelle de Jong <[email protected]>
# Note: Please send me an email if you enhanced the document
# Date: 2010-05-24 / 2010-07-04
# License: CC-BY-SA
# This document is free documentation; you can redistribute it and/or
# modify it under the terms of the Creative Commons Attribution Share
# Alike as published by the Creative Commons Foundation; either version
# 3.0 of the License, or (at your option) any later version.
#
# This document is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# Creative Commons BY-SA License for more details.
#
# https://creativecommons.org/licenses/by-sa/
#-----------------------------------------------------------------------
# for commercial support contact me, part of the revenue go back to tinc
#-----------------------------------------------------------------------
# https://www.tinc-vpn.org/
# https://www.tinc-vpn.org/examples/bridging
# https://www.tinc-vpn.org/documentation/tinc_toc
#-----------------------------------------------------------------------
# <@guus> Well all the tinc daemons together act like a single switcch
# <@guus> And each node in the VPN is connected to a port of that switch
# <@guus> And if you bridge the VPN interface with eth0, then it's like you plug a cable in a port of your eth0 LAN and the other end of that cable into the tinc switch
#-----------------------------------------------------------------------
unset LANG LANGUAGE LC_ALL
apt-get update; apt-get dist-upgrade
apt-cache show tinc
apt-get install tinc
apt-get install bridge-utils
#-----------------------------------------------------------------------
/etc/init.d/tinc stop
#-----------------------------------------------------------------------
# ls -hal /dev/net/tun
crw-rw-rw- 1 root root 10, 200 May 20 20:07 /dev/net/tun
# grep tinc /etc/services
tinc 655/tcp # tinc control port
tinc 655/udp
cat /usr/share/doc/tinc/README.Debian
zcat /usr/share/doc/tinc/README.gz | less
zcat /usr/share/doc/tinc/NEWS.gz | less
cat /usr/share/doc/tinc/examples/tinc-up
w3m /usr/share/doc/tinc/tinc_0.html
cat /etc/default/tinc
less /etc/init.d/tinc
#-----------------------------------------------------------------------
vim /etc/default/tinc
EXTRA="-d"
cat /etc/default/tinc
#-----------------------------------------------------------------------
cat /etc/tinc/nets.boot
echo 'powercraft01' | tee --append /etc/tinc/nets.boot
cat /etc/tinc/nets.boot
#-----------------------------------------------------------------------
ls -hal /etc/tinc/scallab01/
mkdir --verbose /etc/tinc/powercraft01/
mkdir --verbose /etc/tinc/powercraft01/hosts/
touch /etc/tinc/powercraft01/tinc.conf
#-----------------------------------------------------------------------
vim /etc/network/interfaces
# tinc-vpn: dhcp bridge
auto br0
iface br0 inet static
address 192.168.3.1
netmask 255.255.255.0
# pre-up /sbin/ifconfig eth2 hw ether 00:1b:21:61:af:d7
# pre-up /sbin/ifconfig eth2 0.0.0.0
# bridge_ports eth2
bridge_ports tun1
bridge_maxwait 1
bridge_fd 2.5
post-up /bin/echo 1 > /proc/sys/net/ipv4/conf/br0/proxy_arp # optional
cat /etc/network/interfaces
#-----------------------------------------------------------------------
echo 'interface "br0" {
request subnet-mask, broadcast-address, time-offset,
host-name, netbios-scope, interface-mtu, ntp-servers;
}' | tee --append /etc/dhcp3/dhclient.conf
cat /etc/dhcp3/dhclient.conf
#-----------------------------------------------------------------------
vim /etc/dhcp3/dhcpd.conf
subnet 192.168.3.0 netmask 255.255.255.0 {
range 192.168.3.200 192.168.3.240;
option routers 192.168.3.1;
option domain-name-servers 192.168.3.1;
}
#-----------------------------------------------------------------------
ifdown br0
ifup br0
#-----------------------------------------------------------------------
vim /etc/default/dhcp3-server
INTERFACES="vlan2 eth0 br0" # add the br0 to the correct location
/etc/init.d/dhcp3-server restart
ps aux | grep dhcp
tail -n 400 -f /var/log/syslog
#-----------------------------------------------------------------------
ifconfig br0
route -n
brctl show
#-----------------------------------------------------------------------
# ifconfig br0
br0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::dc56:d3ff:fe1a:31df/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2568 (2.5 KB) TX bytes:1536 (1.5 KB)
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 vlan2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
84.245.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 84.245.3.1 0.0.0.0 UG 100 0 0 eth1
# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.000000000000 no
#-----------------------------------------------------------------------
echo 'AddressFamily = ipv4
Device = /dev/net/tun
Interface = tun1
Mode = switch
Name = server01' | tee /etc/tinc/powercraft01/tinc.conf
cat /etc/tinc/powercraft01/tinc.conf
chmod 640 /etc/tinc/powercraft01/tinc.conf
ls -hal /etc/tinc/powercraft01/tinc.conf
echo '#!/bin/sh
ifconfig $INTERFACE 0.0.0.0
route add -net 192.168.30.0 netmask 255.255.255.0 br0 # optional subnet
brctl addif br0 $INTERFACE' | tee /etc/tinc/powercraft01/tinc-up
cat /etc/tinc/powercraft01/tinc-up
chmod 750 /etc/tinc/powercraft01/tinc-up
ls -hal /etc/tinc/powercraft01/tinc-up
echo '#!/bin/sh
brctl delif br0 $INTERFACE
route del -net 192.168.30.0 netmask 255.255.255.0 br0 # optional subnet
ifconfig $INTERFACE down' | tee /etc/tinc/powercraft01/tinc-down
cat /etc/tinc/powercraft01/tinc-down
chmod 750 /etc/tinc/powercraft01/tinc-down
ls -hal /etc/tinc/powercraft01/tinc-down
#-----------------------------------------------------------------------
rm /etc/tinc/powercraft01/rsa_key.priv
rm /etc/tinc/powercraft01/hosts/server01
tincd -n powercraft01 -K
#-----------------------------------------------------------------------
getent services | grep 656
#-----------------------------------------------------------------------
vim /etc/tinc/powercraft01/hosts/server01
# add on head of file
Compression = 9
PMTU = 1492
PMTUDiscovery = yes
Port = 656
cat /etc/tinc/powercraft01/hosts/server01
#-----------------------------------------------------------------------
/etc/init.d/tinc stop
fg
/usr/sbin/tincd --net powercraft01 --no-detach --debug=5
#-----------------------------------------------------------------------
/etc/init.d/tinc restart
tail --line=500 --follow /var/log/syslog
#-----------------------------------------------------------------------
ifconfig br0
ifconfig tun1
route -n
brctl show br0
brctl showmacs br0
#-----------------------------------------------------------------------
# ifconfig br0
br0 Link encap:Ethernet HWaddr 1e:eb:95:c3:04:d8
inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::dc56:d3ff:fe1a:31df/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3328 (3.3 KB) TX bytes:2408 (2.4 KB)
# ifconfig tun1
tun1 Link encap:Ethernet HWaddr 1e:eb:95:c3:04:d8
inet6 addr: fe80::1ceb:95ff:fec3:4d8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:2627 (2.6 KB) TX bytes:1340 (1.3 KB)
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 vlan2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
84.245.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 84.245.3.1 0.0.0.0 UG 100 0 0 eth1
# brctl show br0
bridge name bridge id STP enabled interfaces
br0 8000.1eeb95c304d8 no tun1
# brctl showmacs br0
port no mac addr is local? ageing timer
1 1e:eb:95:c3:04:d8 yes 0.00
1 86:03:27:21:2e:60 no 44.19
#-----------------------------------------------------------------------
ps aux | grep tincd
tincd -n powercraft01 -kUSR2
tail -n 100 /var/log/syslog
#-----------------------------------------------------------------------
May 24 17:29:31 ashley tinc.powercraft01[11557]: Statistics for Linux tun/tap device (tap mode) /dev/net/tun:
May 24 17:29:31 ashley tinc.powercraft01[11557]: total bytes in: 468
May 24 17:29:31 ashley tinc.powercraft01[11557]: total bytes out: 0
May 24 17:29:31 ashley tinc.powercraft01[11557]: Nodes:
May 24 17:29:31 ashley tinc.powercraft01[11557]: server01 at MYSELF cipher 0 digest 0 maclength 0 compression 0 options 4 status 0018 nexthop server01 via server01 pmtu 1518 (min 0 max 1518)
May 24 17:29:31 ashley tinc.powercraft01[11557]: End of nodes.
May 24 17:29:31 ashley tinc.powercraft01[11557]: Edges:
May 24 17:29:31 ashley tinc.powercraft01[11557]: End of edges.
May 24 17:29:31 ashley tinc.powercraft01[11557]: Subnet list:
May 24 17:29:31 ashley tinc.powercraft01[11557]: a2:63:0:96:a:c8#10 owner server01
May 24 17:29:31 ashley tinc.powercraft01[11557]: End of subnet list.
#-----------------------------------------------------------------------
tcpdump -n -i br0 broadcast
tcpdump -n -i tun0 broadcast
#-----------------------------------------------------------------------
tcpdump -n -e -i br0 icmp
tcpdump -A -p -n -i br0 port 80
tcpdump -A -p -n -i br0
tcpdump -i br0 host 84.245.3.195 -l
#-----------------------------------------------------------------------
cat /var/lib/dhcp3/dhcpd.leases
#-----------------------------------------------------------------------
# optional
export LAN01=vlan2
export VPN02=br0
# /sbin/iptables --append FORWARD --in-interface br0 --out-interface vlan2 --jump ACCEPT
/sbin/iptables --append FORWARD --in-interface ${VPN02} --source 192.168.3.150 --destination 192.168.2.206 --out-interface ${LAN01} --jump ACCEPT
#-----------------------------------------------------------------------
上一篇: zeroconf IP 和 DNS 配置
下一篇: 簡單橋接與 DHCP 客戶端